Base cabinets

for questions and conversations regarding estimating projects with The Assistant Estimating System
Post Reply
peter landry
Posts: 4
Joined: Mon Aug 08, 2011 8:42 am

Base cabinets

Post by peter landry » Fri Aug 12, 2011 3:07 pm

John,
I have a project with wide base cabinets. They have four drawers on either side and one door in the middle. What is the best way to enter this?

Peter

User avatar
John Whitling
All knowing
Posts: 92
Joined: Tue Dec 04, 2007 6:14 pm

Re: Base cabinets

Post by John Whitling » Fri Aug 12, 2011 3:22 pm

Peter
You can add a new cabinet style to the system that would have 8 drawers (a mix of regular sized and large sized drawers, depending on your layout), 1 door, 2 vertical dividers, and set the drawer stack quantity to 3. That should get you there. If this is your first time creating a cabinet style you might want to watch the video tutorial about that.

Alternatively, if this is a one time "one off" unit, you might elect to take it off as three cabinets. You would likely build it that way in that case.

Does that help?
Thanks for participating!

Post Reply